Epoxies & Protective Coating
MC-Epo Paint T.C
Epoxy Top Coat
MC-Epo Paint T.C is a two pack epoxy top coat based on epoxy resin.
| Colour | Available in a wide range of colours |
|---|---|
| Specific gravity @ 25°C | 1.5 after mixing |
| Solids by volume | 65% ± 2 |
| Gloss | Glossy |
| Flexibility | Good |
| Recommended dry film thickness | 50 µm DFT |
| Theoretical spreading rate | Source table: WFT / DFT / m²/L |
| Application method | Airless spray, brush or roller |
| Airless spray pressure | 1500-1800 psi at nozzle |
| Nozzle tip | 0.018-0.023 in |
| Spray angle | 40°-75° |
| Pot life @ 20°C | 2 hours; reduced at higher temperature |
| Thinner / cleaner | MC-Thinner No. 02 |
Description
MC-Epo Paint T.C is a two-pack epoxy top coat based on epoxy resin.
Where to use
Finishing coat for epoxy coating systems.
Advantages
Excellent corrosion protection. Excellent finishing properties. Outstanding resistance to extreme weather conditions. Chemical resistance.
Drying time
Substrate Surface dry Cured Recoat min. Recoat max. 10°C 3 h 14 d 18 h * 25°C 2 h 7 d 10 h * 35°C 1 h 5 d 6 h *
Application conditions
Typical values at 50 µm DFT with free air circulation. The surface should be free from contamination before the subsequent coat. During application, substrate temperature should be at least 10°C and at least 3°C above the dew point of the air.
Surface preparation
The surface should be clean and dry.
Packaging
5 kg component A + 1 kg component B; 20 kg component A + 4 kg component B.
Storage & handling
Keep containers tightly closed in a cool, dry place. Handle with care and stir well before use for at least 3-5 minutes.
PROJECT / NEXT STEP
Bring us the condition on site.
Share the project stage, substrate, problem and site condition. If you used Solution Finder, your technical summary comes with you.