Water Proofing & Joint Sealants
MC-Flexicote
Synthetic Rubber Coating
MC-Flexicote is a water-born quality paint material based on styrenated acrylic polymer , characterized by thixotropic properties; formulated to expand the scope of emulsion range and fulfill requirements in the architectural field.
| Colours | Available in a wide range of colours |
|---|---|
| Solids content | 40% by volume |
| Density | 1.6 ± 0.1 g/cm³ |
| Theoretical coverage | 2-4 m²/kg per coat |
| Flash point | Non-flammable - water-based product |
| Drying time | Touch dry: 2 hours; full dry: 24 hours |
| Recoat time | After 6 hours |
| Shelf life | 12 months under normal storage conditions |
| Packaging | 20 kg |
Description
MC-Flexicote is a high-quality water-based styrenated acrylic polymer coating with thixotropic properties. It is formulated for architectural use as a flexible decorative and protective coating.
Where to use
Interior and exterior decorative/protective coating over new and existing surfaces. Concrete, fair-faced concrete, brick, plaster and suitably prepared metal. Gypsum boards, blocks and masonry. Areas exposed to moisture.
Advantages
High flexibility with good decorative and protective properties. Thixotropic behaviour supports controlled application. Good colour retention and resistance to ultraviolet exposure and weathering. Good adhesion and weather resistance. Good resistance to wet washing and fungal growth, as stated by the source. Washable and suitable for alkaline substrates. Allows the substrate to breathe. Can be used as a crack-filling compound with suitable fillers, as stated by the source. Can function as a water-resistant coating membrane.
Surface preparation
Remove grease, oil and all surface contaminants. Remove laitance, surface porosity and unsound material by wire brushing or suitable mechanical cleaning. On previously coated surfaces, remove blistered, cracked and weak coatings; roughen glossy areas to improve intercoat adhesion. The substrate must be clean and free from contamination before coating.
Mixing & application
Stir thoroughly before use. Limited dilution with fresh water may be used only where required. Apply by brush, roller or spray in two or three coats over a properly prepared and sealed/treated substrate as appropriate.
Cleaning, storage & packaging
Clean tools and equipment with water immediately after use. Shelf life: 12 months under normal storage conditions. Packaging: 20 kg.
PROJECT / NEXT STEP
Bring us the condition on site.
Share the project stage, substrate, problem and site condition. If you used Solution Finder, your technical summary comes with you.