MCT ENGINEERED SYSTEM

Fiber-reinforced cementitious concrete repair

Localized concrete repair using fiber-reinforced shrinkage-compensated repair mortar

Fiber-reinforced cementitious concrete repair

CONDITIONS

Start with the site

Localized concrete repair using fiber-reinforced shrinkage-compensated repair mortar · Concrete · Repair | vertical/horizontal depending product source

A bonding primer is not included in this repair sequence.

MCT / STAGES

System stages

See each stage in context, understand its technical role and open the relevant MCT product data directly.

APPLICATION SEQUENCE

Select a stage. Follow its role to the product and technical data.

Substrate preparation

  1. Clean and remove contamination; pre-wet substrate

    System material reference; prepare the substrate as described above.

    Patch FTDS ↗
  2. Mix using MCT water range

  3. Apply by spray/shotcrete or trowel; force mortar into substrate

  4. Cure with water or curing compound as soon as possible

MCT / PRODUCT ROLES

MCT products in this system

Non Shrink Grout & Repair Materials

MC-Patch F

Shrinkage Compensated and Fiber reinforced Patching and Repair Mortar

MCT / TDS

Technical data

TDS / CURRENT

MC-Patch F

Revision 2.0 ·

PROJECT / NEXT STEP

Bring us the condition on site.

Share the project stage, substrate, problem and site condition. If you used Solution Finder, your technical summary comes with you.

Ask an Engineer