Rigid cementitious waterproofing

CONDITIONS

Start with the site

Concrete / masonry waterproofing using the standard Flow Seal route · Concrete | masonry | cementitious · Interior | exterior | wet service

Select the rigid or flexible route using the product requirements.

MCT / STAGES

See each stage in context, understand its technical role and open the relevant MCT product data directly.

APPLICATION SEQUENCE

Select a stage. Follow its role to the product and technical data.

Clean and remove defective/contaminated material
System material reference; prepare the substrate as described above.
Flow Seal TDS ↗
Repair and plug defects before coating
Flow Plug TDS ↗
Dampen substrate; no free water
Flow Seal TDS ↗
Brush/scrub coating into pores
Flow Seal TDS ↗
Apply second coat after 24 h
Flow Seal TDS ↗